As you go through the setup, consider labeling each piece of equipment, particularly the various power cables. This will allow you to determine quickly what each item is every time you assemble your kit.
Remove the power extension cord and the power strip from the bottom layer of the Pelican case.
Plug the power cord into a power outlet and extend it so it reaches your table.
The power cord included is 10 feet long. If your table is farther away from your power outlet, you will either need to move your table closer or use longer extension cords.
Then, plug the power strip into one of the three outlets available on the extension cord. Make sure you turn on the power strip by pressing the power switch; the switch will light up when it is turned on.
You now have nine outlets available at your disposal.